FOT

Optical fiber welding machine breakdown maintenance to do?

by:FOT     2020-11-09
Due to welding machine is high which combines optical, mechanical, electronic precision instruments, without professional training, don't open instrument without authorization, any accidentally will cause irreparable damage, but the user is in when encountering an urge to know their machine is the cause of the problem. Open switch screen after welding machines without light, and found that after opening the wind cap electrode holder on the level of lighting is not bright. Solution: check whether the power connector plug, if not then plug again. Check whether the power fuse disconnect, if the replacement spare fuse. Optical fiber can perform normal reset, to set the screen dimmed, clearance to no fiber image, and stop in & other screen display, Set the clearance & throughout; 。 Solution: check and confirm whether the wind cap in place or whether the reed contact pressure is good. Open the bottom of the screen after welding machines appear & other; Throughout its battery runs out &; Call and a buzzer. Solution: this phenomenon generally appear in the case of using battery power, only need to replace the power supply. Check and confirm the power fuse box are on tight. Optical fiber can perform normal reset, to set the interval to fiber appears on the screen but stopped motionless, and stop in & other screen display, Set the clearance & throughout; 。 The solution: press & other; Reset & throughout; Key, and make the system reset. Open the wind cap, respectively open left and right holder. Order the following check: check whether there is a broken fiber. Check whether the cutting length is too short. Check whether fibre channel and matching. And carry on corresponding processing. Optical fiber can perform normal reset, to set the interval to fiber continued backward movement, welding machine & other screen display, Set the clearance & throughout; And & other; Heavily armoured & throughout; 。 Solution: it could be the microscope eyepiece dust deposition in the optical system caused by too much, stick with cotton to wipe the horizontal and vertical two road microscope eyepiece, observe with the eye has no obvious dust and then try again.
Fibra Opticas Tek Technology Co., Ltd.’s administrative systems and management team are extraordinary-you'll need them to get a new location up and running.
A detailed plan must be developed if we hope to reach your profitability goal. Once we have a certain figure in mind, Fibra Opticas Tek Technology Co., Ltd. and our staff need to determine all the steps necessary to reach that goal and act on them.
Fibra Opticas Tek Technology Co., Ltd. provides the ideal conditions for business creation – access to cash, human capital and affordable office space, for instance – can help new ventures not only take off but also thrive.
What Fibra Opticas Tek Technology Co., Ltd. discovered was that innovation occurs when business models match up with one or more of the fiber optic equipment where technological advances overlap with market needs, thus resulting in growth and transformation.
Fibra Opticas Tek Technology Co., Ltd. have found that nurturing relationships with clients by welcoming them to our factory can be valuable to all parties.
Custom message
Chat Online
Chat Online
Chat Online inputting...