Optical fiber sensor technology parameters and specifications
test object
100 x 100 mm, t = 2 mm, Alminum board
voltage
12 v to 24 VDC, & plusmn; The power consumption of the 10%
1. 3 w ( Zui)
110mA ( 12伏直流电)
55mA ( 24VDC) Response speed
150 ms
300 ms
analog output
4 to 20 ma output current ( Resistance to 0 250 ohms)
resolution ( * 1)
0。 9毫米( 0. 1% F。 年代。 )
2。 6毫米( 0. 1% F。 年代。 )
linearity
& plusmn; 1% F。 年代。
using the environment temperature
1% F. 年代。 ( Max。 ) 23? C when the output value
- 10 - 55? C
ultrasonic frequency
about. 200 KHZ
about. 75KHz
操作指示
操作指示: 橘色, 运行指示: 绿色, 4mA: 红色, mid: 橘色, 20mA: 绿色
Teaching system
Distance setting, Output inversion
Teaching input
设定按钮或外部输出
引线
M12 x 4p Din 端子接头 *2
重量
150g( Max。 )
300 g ( Max。 ) Characteristics of
to prevent mutual interference
with temperature compensation device
material
enclosure: nickel plating layer
positive: nylon resin, silicon, glass epoxy resin
temperature range
operating temperature: - 10 + 55? C, the storage temperature: - 40 and + 85? C
湿度
35 to 85%RH
防护等级
IP67
抗振
10Hz
抗震强度
50G 3 times in X, Y , Z 方向
电解质强度
1,000VAC 50/60Hz /分钟
绝缘电阻
Min. 50 mΩ ( 在500伏直流电)